How To Repair Kohler Single Handle Faucet No Hot Water

How to Repair a Leaky Two-Handle Faucet

Pace-by-step Instructions

Is annihilation more annoying than a leaky faucet? Maybe not; Simply it's likewise well within your power to set it yourself with Danco. Read on, to discover out how.

Tools and supplies required: Flat head screwdriver, Phillips head screwdriver, wrench, seat removal tool (optional)

1

First, determine the source of the leak. If h2o is leaking from underneath the handle onto the counter, the stem of whichever handle is leaking needs to be replaced.

If water is dripping from the faucet, turn off the hot water supply valve nether the sink. If water is still dripping, you need to replace the common cold stem (right handle). If the water stops dripping when you turned off the hot water valve, you need to replace the hot stem (left handle). In one case you've determined the trouble stalk, plough off the water supply.

2

Remove the Handle by lifting off the Alphabetize Cap with a flathead screwdriver. Next, Remove the handle (so the stem is visible) by loosening the Set Screw by the screw counter-clockwise. Gear up bated the Handle, Set Screw and Handle Push button to reinstall at the end of the project.

iii

If you take a plastic stalk, unscrew the superlative cap and pop out the stalk. If you have a contumely stem, remove the stem by using a wrench and rotating information technology counter clockwise until it threads out entirely. Take a look at the Washer which is located on the lower terminate of the Stalk. If the Washer is squeezed flat or has a groove worn in information technology, a Washer Kit coupled with a new Faucet Seat will likely solve your problem. When replacing the faucet seat, y'all can remove and supplant the seat with an Allen wrench or a seat removal tool. Turn the seat counterclockwise to loosen, clockwise to tighten.

In one case removed, yous will need to accept your stem to your local home improvement store and use the Perfect Match locator organization from Danco or use the online Stem Finder. This arrangement makes information technology piece of cake to find your replacement.

four

Once you have purchased your new stem, y'all can install it into your faucet

• Install a brass stalk by rotating clockwise until it threads entirely and tighten with a wrench.
• Install a plastic stem by placing the stem into the handle base and screw on the top cap.

v

Now is a groovy time to upgrade your faucet's appearance with universal metal handles.

How to install the new universal handles

• Identify the handle adapter over the stem and tighten
• Place the new handle on the adapter and insert the handle screw into the washer then into the handle and tighten.
• If your new handle has an index push, identify it on the handle.

Finally, turn the water back on to ensure the leak is fixed.

Source: https://www.danco.com/how-to-guide/how-to-repair-a-leaky-two-handle-faucet/

Posted by: thompsoncongs1955.blogspot.com

Share this post